Fairview Residential Aluminum Double Walkway Gates - Arched Spear Picket Top

Fort Mill Ornamental Fairview Residential Double Walkway Gates
Material: 6063 Series Aluminum Alloy With AAMA 2604 Powder Coating - Welded Construction
Heights: 36", 48", 54", 60"
Widths: 96" 120", 144" (8ft - Two 4ft leafs, 10ft - Two 5ft leafs, 12ft - Two 6ft leafs)
Picket Designs: Standard Picket, Puppy Picket
Top Designs: Straight Top, Rainbow Arch Top, Estate Arch Top
Colors: Black, Bronze or White
Arch Rise on Rainbow & Estate Arches: 6" on 96" Width, 12" on 120" and 144" Widths
Fairview Fencing ICC Pool Code Approved Heights:
Standard Picket Design: 60" Flush Bottom and 72" Heights. Check your local pool codes before purchasing.

Add Gate Hardware: There are 3 options available: No Hardware. Standard Hardware will include (4) 5" Self Closing, Gate Color Matched, Hinges a D&D Technologies, Gate Color Matched, Gravity Standard Latch and a Nationwide Industries Security Drop Bolt. Pool Code Hardware will include (4) D&D Technologies, Black, TruClose Heavy Duty Self Closing Hinges a 20 1/2" D&D Technologies, Black, Series 3 MagnaLatch and a D&D Technologies Black LokkBolt Security Drop Bolt. Additional Gate Hardware Options Can Be Seen Here.

Accent Upgrades: When you add these options, gates will ship with the finials, rings or scrolls installed. PLEASE NOTE: Triad and Victorian finials cannot be installed on double picket fence sections and gates. Rings and scrolls cannot be installed on double picket fence sections and gates.

Slope Upgrade: Used for gates that are located on hilly terrain. When you add this option and specify the slope in inches, we will build your gate to match your specification.

All of our fence sections, posts and gates are Made in the USA with American materials.

To accommodate different hardware mounting options, the opening between the posts should equal the size of the gate that was ordered PLUS 1/2” (i.e., If you ordered a 96” double gate, space your posts at 96 1/2” inside to inside). Please Note: When we fabricate our gates we deduct 1” from the width of each leaf to accommodate for the hinges and latch leaving a 2 1/2” gap on all.